CW2000 Footrest
CW2000 Footrest
Stable Foot Support with Simple Height Adjustment
The CW2000 Footrest provides a broad, stable platform for supporting the feet when the chair needs to be positioned higher than the user's feet can comfortably reach the floor.
Its height is adjusted using removable spacer blocks, allowing the support level to be matched more closely to the individual without complicated moving mechanisms.
The CW2000 Footrest is best positioned as a simple, stable height-adjustable foot support for users whose feet do not rest comfortably on the floor once the chair has been set correctly for the desk. Its strongest features are the large 460 × 310 mm platform, fixed 12.5° angle, spacer-block height adjustment, anti-static carpet surface and Australian manufacture.
Key Features
- adjustable ergonomic footrest
- platform approximately 460 W × 310 D mm
- platform angle approximately 12.5°
- base height with one spacer set approximately:
- 36 mm front
- 105–106 mm rear
- each additional spacer set adds approximately 17.5 mm
- 3 spacer sets supplied
- additional spacer blocks available separately
- anti-static charcoal carpet covering
- grey base
- stable non-slip platform
- Australian made
- 12-month warranty
Support
Elevation
Angles
Tilt
.png)
What this means for you when the 4 elements are aligned
| Corrected screen alignment → reduced neck strain |  - S E E™ |
| Better pelvic support → less lower back fatigue |  - S E A T™ |
| Arm positioning → reduced shoulder load |  - A R M S™ |
| Movement support → reduces static load |  - S P A S™ |
R E P O S E™ Outcome
The CW2000 supports Natural R E P O S E™ by helping coordinate the chair height, supported feet and primary work surface.
Set the chair for the work — then bring the floor up to the feet.
- 460mm Wide
- 310mm Deep
- 36mm Height at front
- 105mm Height at rear
- Additional blocks can be added
Warranty Period: 12 Months
CW2000 Footrest
- large 460 × 310 mm foot platform
- fixed 12.5° support angle
- adjustable height using spacer blocks
- 3 sets of spacer blocks supplied
- anti-static carpet surface
- Australian made
Who Is It For?
Suitable for users who:
- cannot comfortably place both feet on the floor after the chair has been adjusted to the desk
- need additional foot support beneath the workstation
- prefer a stable fixed-angle footrest
- want simple height adjustment without levers or moving platforms
- work at office, home or shared workstations
- need a footrest that can be adjusted for different leg lengths
Problem to Solve
Chair height should first be set so the user can work comfortably relative to the desk, keyboard and mouse.
For some users, particularly at fixed-height desks, this means the chair must be raised until the feet no longer rest securely on the floor.
Allowing the feet to hang unsupported can reduce stability through the lower body and encourage the user to slide forward or search for another place to rest the feet.
The CW2000 provides a stable elevated surface beneath both feet, allowing the chair height to remain appropriate for the workstation while restoring supported foot contact.
Height can be increased in 17.5 mm increments by adding spacer blocks beneath the platform.
S E A T™ — Supporting
Support · Elevation · Angles · Tilt
The CW2000 complements S E A T™ by helping complete the relationship between the chair, legs and floor.
It can help users:
- maintain stable foot contact
- avoid leaving the feet unsupported
- retain a chair height appropriate to the desk
- support the thighs without relying on excessive pressure at the front of the seat
- establish a more stable seated base
The footrest should support the chair setup — not compensate for a chair that has been incorrectly adjusted.
A R M S™ — Supporting
A footrest can also indirectly support A R M S™.
If the chair needs to be raised so the elbows and forearms align more appropriately with the keyboard and mouse, the CW2000 allows the feet to remain supported at that higher chair position.
CW2000 Footrest
Stable Foot Support with Simple Height Adjustment
The CW2000 Footrest provides a broad, stable platform for supporting the feet when the chair needs to be positioned higher than the user's feet can comfortably reach the floor.
Its height is adjusted using removable spacer blocks, allowing the support level to be matched more closely to the individual without complicated moving mechanisms.
The CW2000 Footrest is best positioned as a simple, stable height-adjustable foot support for users whose feet do not rest comfortably on the floor once the chair has been set correctly for the desk. Its strongest features are the large 460 × 310 mm platform, fixed 12.5° angle, spacer-block height adjustment, anti-static carpet surface and Australian manufacture.
Key Features
- adjustable ergonomic footrest
- platform approximately 460 W × 310 D mm
- platform angle approximately 12.5°
- base height with one spacer set approximately:
- 36 mm front
- 105–106 mm rear
- each additional spacer set adds approximately 17.5 mm
- 3 spacer sets supplied
- additional spacer blocks available separately
- anti-static charcoal carpet covering
- grey base
- stable non-slip platform
- Australian made
- 12-month warranty
Support
Elevation
Angles
Tilt
What this means for you when the 4 elements are aligned
| Corrected screen alignment → reduced neck strain | - S E E™ |
| Better pelvic support → less lower back fatigue | - S E A T™ |
| Arm positioning → reduced shoulder load | - A R M S™ |
| Movement support → reduces static load | - S P A S™ |
R E P O S E™ Outcome
The CW2000 supports Natural R E P O S E™ by helping coordinate the chair height, supported feet and primary work surface.
Set the chair for the work — then bring the floor up to the feet.
- 460mm Wide
- 310mm Deep
- 36mm Height at front
- 105mm Height at rear
- Additional blocks can be added
Warranty Period: 12 Months
