Microdesk Compact
A portable, lightweight, and translucent accessory that is both a writing slope, and in-line document holder that fits over the top of the keyboard. A keyboard can be stored underneath when not in use.
Screw in feet provide limited height and angle adjustable
• Surface 430 mm wide x 310 mm deep
• Front height adjusts from 75 mm – 95 mm
• Rear height adjusts from 150 mm – 190 mm
• Weight - 1.5 kg in carton
• Paper ledge supplied in two heights: 20mm and 8mm
When writing on the Microdesk™ it is important to:
• Keep your elbows within range of your body, no reaching out.
• Write with a bent elbow not a straight arm so you can access the function and number keys of the keyboard beneath the front edge of the Microdesk™
• Rest your forearm comfortably on the platform on top when using the Microdesk™ for writing.
• Keep your chair close to the desk and your mouse close to the keyboard.
• Keep your back and feet well supported, and your shoulders and neck relaxed for work.
The Microdesk™ suits left and right-handed writers. There is a removable lip at the base to stop your papers from sliding off – don't lean your wrist on the high lip while writing, keep to the side where there is a flat area OR change to the low lip profile. The ruler / line guide is included with all desk models.
.png)
S E E™ - Visual Demand
Screen
Eye-line
Environment
What this means for you when the 4 elements are aligned
- Corrected screen alignment → reduced neck strain
- S E E™ - Better pelvic support → less lower back fatigue
- S E A T™ - Arm positioning → reduced shoulder load
- A R M S™ - Movement support → reduces static load
- S P A S™
.png)
The core is R E P O S E™ - the natural, low-load comfort
achieved when Vision, Support, Reach and Movement are aligned.
- 430mm Wide
- 310 mm Deep
- Acrylic Reading / Writing Surface
- Height and Angle Adjustable
Warranty Period: 12 Months
Microdesk Compact
- 430mm Wide
- 310 mm Deep
- Acrylic Reading / Writing Surface
- Height and Angle Adjustable
Achieving Natural R E P O S E™
VISION
If vision is out of alignment, the whole posture system collapses.
Within the R E P O S E Framework™, S E E - Visual Demand is the starting point.
If the monitor is too low, too high, too far away, too close, off-centre or visually difficult to read, then the body will compensate and contort.
The user may lean forward, drop the head, round the shoulders,
twist the neck or move away from the chair’s support geometry.
Once that happens, the benefits of S E A T, A R M S and S P A S are reduced because the body is no longer working from an aligned, balanced visual reference point.
Vision governs posture.
If the screen is out of alignment, the user’s head, neck, shoulders and upper body will adapt to the screen - rather than the workstation supporting the user.
The M2.1 Monitor Arm applies S E E - Visual Demand by allowing the monitor to be positioned correctly, helping preserve the alignment required for Natural R E P O S E™.
By improving visual alignment, the M2.1 helps support a more balanced working posture, clearer desk organisation and reduced visual and postural strain — contributing to Natural R E P O S E™.
S E E™ - Visual Demand
Screen
Eye-line
Environment
Control visual input - screen position, eye-line alignment and surrounding visual environment to reduce strain and maintain neutral head posture.
A portable, lightweight, and translucent accessory that is both a writing slope, and in-line document holder that fits over the top of the keyboard. A keyboard can be stored underneath when not in use.
Screw in feet provide limited height and angle adjustable
• Surface 430 mm wide x 310 mm deep
• Front height adjusts from 75 mm – 95 mm
• Rear height adjusts from 150 mm – 190 mm
• Weight - 1.5 kg in carton
• Paper ledge supplied in two heights: 20mm and 8mm
When writing on the Microdesk™ it is important to:
• Keep your elbows within range of your body, no reaching out.
• Write with a bent elbow not a straight arm so you can access the function and number keys of the keyboard beneath the front edge of the Microdesk™
• Rest your forearm comfortably on the platform on top when using the Microdesk™ for writing.
• Keep your chair close to the desk and your mouse close to the keyboard.
• Keep your back and feet well supported, and your shoulders and neck relaxed for work.
The Microdesk™ suits left and right-handed writers. There is a removable lip at the base to stop your papers from sliding off – don't lean your wrist on the high lip while writing, keep to the side where there is a flat area OR change to the low lip profile. The ruler / line guide is included with all desk models.
S E E™ - Visual Demand
Screen
Eye-line
Environment
What this means for you when the 4 elements are aligned
- Corrected screen alignment → reduced neck strain - S E E™
- Better pelvic support → less lower back fatigue - S E A T™
- Arm positioning → reduced shoulder load - A R M S™
- Movement support → reduces static load - S P A S™
The core is R E P O S E™ - the natural, low-load comfort
achieved when Vision, Support, Reach and Movement are aligned.
- 430mm Wide
- 310 mm Deep
- Acrylic Reading / Writing Surface
- Height and Angle Adjustable
Warranty Period: 12 Months
